T-UHSP 1.6 Ultra-High-Speed Precision Handpiece

T-UHSP 1.6 Ultra-High-Speed Precision Handpiece

$430.00Price
GST Included

The ultra-high speed air turbine handpiece runs up to 300.000 rpm, mostly used for wood and Bone carving, detailing, piercing, jewellery, texturing fine work.

This runs at such an ultra-high speed you can sign your name in timber like a pen.

Works with FG/TC straight 1/16 inch 1.6mm burs.

Has 2-holes connection, but only one is used for airflow - no water/condensation through airline as it will burn out the rotor cartridge as the same as its counterpart the NSK Presto.

Built for non-stop work in any condition - (just don't forget to lubricate it with our recommended oil 1 drop before starting a job and 1 drop an ½ hour and keep dust and water out of airline and it will be good to go for all jobs big or small.

If you're looking for a fine and reliable high Precision instrument for work, look no further.

There is no match for this sturdy and hardworking workhorse.

 

We recommend you run it with the kit with the Filter/Regulator/Switch for ease of use and additionally recommend that you run through an additional water trap regulator at the compressor end, so it takes the bulk of the water out before it gets to the T-UHSP1 Handpiece water trap & regulator

 

Optimum Performance and Precision

  • Air Turbine Handpiece
  • The rotational speed of the rotor tip at idle - 5000 - 300000 vol./m
  • Swivel twist-free handpiece
  • Low noise and vibration
  • Unique dust-proof mechanism
  • Maximum power of a tip, not less - 10 W
  • Operating air pressure, Minimum 20 – Maximum 34 PSI and (NO MORE) as it will burn out the rotor cartridge
  • Air consumption It requires a compressor capable of 1.5 CFM at 34 PSI and most compressors of 3/4 HP or larger are fine to run this tool
  • Length - 130 mm
  • Diameter - 20 mm
  • Tip weight, not more than - 0.07 kg
  • Oil 1 drop before starting a job and 1 drop an ½ hour
  • Keep dust and water out of airline.

 

This is the type of high-speed tool that many woodturners/wood artists like Binh Pho
and Gordon Pembridge to create there pierce and texture their work.

 

Included
1 x T-UHSP 1.6 Ultra-High-Speed Precision Handpiece
1 x Transparent airline

1 X Airline End Cap