top of page
Supreme Haarlem Danish Oil - 250mls

Supreme Haarlem Danish Oil - 250mls

$21.00Price
GST Included

My go to foodsafe finish

More sizes available – please see other listings  500mls,  1L,  4L

 

Please note we buy in in bulk so smaller  cans may come Unbranded 

 

A premium quality wood oil built from natural renewable resources - Tung Oil which is pressed from the nut of the Tung Tree and Vegetable Turpentine, which is extracted from Pinus trees, plus a touch of David’s "magic brew".

 

Haarlem Danish Oil is designed to soak into the timber, curing to a tough durable finish, while creating a warm, natural, low lustre.

 

Uses: 

Interior/Exterior - Suitable for all furniture joinery and trims, sarking, bench tops, concrete and stonework. For floors and outdoor use refer to application and preparation.

 

Coverage: 

Previously oiled timber, 12-16 m2 per litre. Dressed smooth timber, 6-12 m2 per litre. Rough sawn or porous timber, 2-8 m2 per litre.

 

Preparation: 

Ensure wood is clean, dry and mould free with moisture content below 18%. Treat any mould or moss with appropriate product. Weathered or grey timber should be chemically treated and/or sanded to remove dead fibres, exposing fresh timber before oiling. Sand to desired finish. Slow drying may occasionally occur on oily timbers such as Rimu, Totara and Matai. On these or previously coated surfaces, apply Haarlem Danish Oil to a test panel to ensure compatibility and thorough drying.

 

Wood Turning

Preparation: 

Ensure wood is clean, dry and mould free with moisture content below 18%. Sand to through all grits up to 400G to 600G or your desired finish. First coat is applied generously keep loading up dry spots. After a few minutes remove all excess oil using a soft dry cloth. Allowed to dry for 16 hours then two further coats at 16 to 24 hours each rub / wiped with the grain with 0000steel wool between coats.

I buff with EEE and your good you can also apply paste wax if you desire over the top.

 

Slow drying may occasionally occur on oily timbers such as Rimu, Totara and Matai. On these or previously coated surfaces, apply Haarlem Danish Oil to a test panel to ensure compatibility and thorough drying.

 

Disclaimer:

The information concerning the use of the product is given in good faith. Because we cannot control the way this product may be used or the conditions that it may be exposed to, we can give no express guarantees in respect of this product or its performance. Neither the seller nor manufacturer shall be liable for any injury, direct or consequential, arising out of the use or inability to use this product.

 

Developed and Made in NZ from local and imported products.

bottom of page